Home > Blog > Ceramic fiber blanket anchor technology
Ceramic fiber blanket anchor technology
9/5/2019

Ceramic fiber blanket anchor technology

Ceramic fiber blankets need to be reinforced when they are used to extend their service life. The following ceramic fiber carpet manufacturers introduce anchoring nail technology:

    The ceramic fiber blanket first reinforcement of the insulation material should be selected according to the thickness of the insulation layer of the anchor.

When the base layer is a cavity block and an aerated concrete block, an anchor with an expansion back screw function should be used.

    Secondly, the anchor points should be set on the wall surface: when the building height is less than or equal to 60 meters, the number of anchors is not less than 6 per square meter in the large-area wall surface; when the building height exceeds 60 meters and is lower than At 100 meters, the number of anchors should be no less than 8 per square meter.

    Any single board with an area greater than 0.1 square meters shall be provided with one anchor.

    The outer wall of the corner, the door and window openings around the mouth and the mouth should be implemented with anchor encryption settings. Add one in the height direction between the existing anchors within a range of 100 mm to 150 mm from the positive angle.

    The effective anchoring depth of the anchor into the base wall shall not be less than 25 mm; when the base wall is an aerated concrete masonry, the effective anchoring depth of the entry shall not be small.

    After understanding the ceramic fiber carpet anchoring technology, I believe that it will bring more help to everyone in the future use. For the above knowledge, we will introduce it to you.