The so-called sharpener does not cut woodworkers by mistake, so does the ceramic fiber blanket. As a thermal insulation material, needle blankets are widely used in many fields, and manufacturers should also strengthen the daily maintenance and cleaning of production equipment.
The production equipment for cleaning ceramic fiber blankets is basically the same as cleaning other equipment. The device uses electrical energy as the main energy source, so turn off the power when cleaning, and wipe the dust on the surface of the device with a dry cloth.
If there is oil stain on the device, you can wipe it with a cloth moistened with diluted detergent, and disable steel balls to avoid scratching the surface of the device. After wiping with a damp cloth, it should be dried as soon as possible, and the device should not be powered on before drying.
The maintenance of ceramic fiber blanket production equipment is mainly divided into parts and internal circuits. There are many wires inside the equipment, so you should check the wires regularly during maintenance, replace the wires with damaged insulation in time, and tighten the loose wires to prevent leakage.
If the parts are worn out, replace the parts with severe wear in time; add lubricating oil properly to reduce parts wear and prolong the service life of the equipment.